Berning Robot 37.5mm F/2.8 Tessar/Xenar Push-on Lens Hood
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Push-on hood for the common standard lenses of the earlier Berning Robot models, fits both the Tessar and Xenar 37.5/2.8
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple push-on lens hood for the standard lenses of the Berning Robot I, II, IIa, ….: 37.5mm F/2.8 Tessar or Xenar, hood fits both lenses as they have the same inner diameter. Also allows use while a filter is mounted to the Tessar :)
Natively, the hood very slightly intrudes into the viewfinder image, if you want a shorter one, just cut off a portion in the slicer.
Prints without support with the side facing the camera up, maybe consider using a brim depending on your bed adhesion. The push-on grip is very slightly oversized for me - give each arm just one or two quick strokes with a needle file to make it a good, tight fit, and you should be able to set the aperture by rotating the hood.
