Renderxy quad Z screw (a Renderxy modification with custom electronics)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4 Z screw modification to the Renderxy modification
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Renderxy quad Z screw (a Renderxy modification with custom electronics)
1st I want thank Supavitax for the Renderxy https://www.printables.com/model/749463-renderxy-an-enderxy-modification
This modification is based on the hard work done by Supavitax, adding a 4th Z screw. I have also included the parts for my custom designed electronics enclosure. Unfortunately I do not have the time to be doing any modifications to this design for other electronics. The design may work with other electronics but what I have used is:
- BTT Octopus Pro (I belive the non pro is the same size and mounting point, please check BTT website) https://biqu.equipment/products/bigtreetech-octopus-pro-v1-0-chip-f446?variant=40144816767074&gad_source=1&gad_campaignid=17447316190&gbraid=0AAAAAoLyodVnjuuOdaUiWaqHJHfeVmcjI&gclid=Cj0KCQjwxo_CBhDbARIsADWpDH5ROfum4BKkrLqGKv5sa_i4IGhvzcoiLJea9swHxxlfFBX7WdNKh3EaAtwREALw_wcB
- Elecrow RC050S HD 5in screen https://www.elecrow.com/rc050s-hdmi-5-inch-800x480-capacitive-touch-monitor-built-in-speaker-with-backlight-control.html
- Raspberry Pi 4B
- Ender 3 PSU
- Fans for front, 30mm x 6mm (thicker will probably work as there is lots of room
The bed mounts have been changed to move the bed 15mm towards the front of the machine so that the Creality Sprite Pro tool head, this gives more printable area.
The BOM is basically the same as the Renderxy but you need to add the extras for the 4th Z screw. You will need a few M3 heat inserts, M3x6-8mm and a few M4 and M4 T nuts to hold the top covers down.
When you assemble this kit it is VERY important to take a lot care to align the rails and screws to ensure there is no binding on any of the 4 Z screws.
I hope you enjoy and this works for your project. I have very much enjoyed designing this and the printer is performing very well now.
Please share makes, I would love to see some crazy colour combinations. Also join us in the renderxy reddit for tips and tricks on how to get the very poor stock Enderxy kit performing.