Liczymy pasujące modele…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I'd recommend printing in PETG at least, although around 30% of my initial testing was done with PLA and didn't notice any issues. Updated 19/05/25: Fixed an issue…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ Uploaded: November 4, 2023 Reverse engineered CAD model for the EnderXY. Printer was dissasembled and each part measured and printed to compare for maximum accuracy,…
Welcome! Been working on an EnderXY kit I got and was not satisfied with the original hotend setup. it was just kind of weird and offset and made it hard to find a good duct to use. Leading me to make this… Kinda wasn't to give it the…
This adapts the stock EnderXY mounting plate to attach a Creality Sprite Extruder. Print in the provided orientation with supports. Print with lots of walls for strength and rigidity. High temp material like PETG recommended, but I used…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I've made this as I've received a few messages on here asking if there was a way to fix the bed wobble without using triple-z. This is untested as I use triple-z, but…
Modified Apogee tool head to mount to the Aditiva3D EnderXY conversion. All screw holes are modified to accept heat sink threaded inserts. Update 9/16/23 - added files for side mount electronics and new cable management end stops. Zip…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ These are a direct replacement for the belt tensioners on the EnderXY. The stock tensioners have many issues when running higher speeds/accel such as belts slowly…
This is a fix I came up with for the EnderXY kit that solves an issue with the Y endstop switch not being able to be triggered because the granty contacts the right tensioner. I took the original X endstop bracket and modified it to add…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ These are untested on a stock machine as I'm using a Rapido UHF and my toolhead sits lower than stock but I've been running them for a few weeks now. The Z endstop…
At some point, it seems that Belt3D began shipping the backplate with slightly larger dimensions and more mounting holes. This backplate measures nominally 50x55mm. Measure yours to see which model applies.
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ Edit: This appears to be correct for the first batch only. If yours has more holes then this backplate will be incorrect. Check the remixed version for the updated…
Renderxy quad Z screw (a Renderxy modification with custom electronics) 1st I want thank Supavitax for the Renderxy https://www.printables.com/model/749463-renderxy-an-enderxy-modification This modification is based on the hard work done…
Credits: To Stanciu_Andrei , the multi-motor madman who allowed me to adapt his SV08 and Merc.1 mods for use on the EnderXY; To BGoat96 , for his feedback, testing, assembly photos, unhinged ideas, and relentless support and enthusiasm…
I broke the hotend part of my sprite extruder and I had a spare spider hotend left lying around so I combined them both, it currently isn't compatible with a touch probe because my sprite extruder did not come with one.
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ These are untested on a stock machine as I'm using a Rapido UHF and my toolhead sits lower than stock but I've been running them for a few weeks now. The Z endstop…
This adapts the stock EnderXY mounting plate to attach a Creality Sprite Extruder. Print in the provided orientation with supports. Print with lots of walls for strength and rigidity. High temp material like PETG recommended, but I used…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I'd recommend printing in PETG at least. I've orientated all the parts ready for printing. This is compatible with my RenderXY modification. If you've managed to…
Front mount for the BTT Pad 7, uses the Ender 4040 front frame mounts, replaces the OEM Creality Screen. Printed in PETG but PLA will work. No Supports if printed with the bottom down. Bolts onto OEM points on the BTT Pad 7 using the…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ Rear cable guide to hold toolhead cables vertically at the rear of the EnderXY. May need supports depending on cooling. Required Hardware: 1x M3 x 4mm x 5mm thread…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ This upgrade will require a mainboard that has 3 independent stepper drivers available for Z (I use an Octopus board). Fixes the main issue with the EnderXY were the…
My gantry could not reach the Y endstop switch before crashing into the belt tensioners. I designed this fix that's integrated into the X endstop mount. The bumper protrudes 10mm from the linear rail carriage block. No additional hardware…
****This design does not currently include the optional support arm holes - Will update when I have that change made**** I LOVE the design the original creator made, however, I have a 3v2 EnderXY, which means I did not have to relocate my…
ON REQUEST FROM ENDERXY GROUP MAKE A LIST OF MY BASE 3D PRINTER I HAVE ADD ALL THE FILE THAT I USED TO MAKE THE BASE OF MY ENDERXY TO KEEP WIRE CLEAN IN THE BUILD AND I HOPE THIS HELP OTHER……. DONT HAVE THE STEP FILE SO PLEASE DONT ASK…
Decided to use the Hero Me Gen7 for my EnderXY conversion. There were no gantry adapters I found that worked for me, so I made my own. Once assembled, I realized that the endstop would not actuate…so I did a quick cut on the Y endstop I'm…
This is UNFINISHED but it should work as I've printed and test fitted it a bunch of times to dial everything in while designing but I have not actually printed with this on my enderXY. Unfortunately I'm abandoning this project as I've…
I give all the credit to Supavitax for this remix. I modified the his file to meet the needs to mount the Micro Swiss NG on my EnderXY. I replaced the original mount with my remix to fit the NG on. You will also need to the extender for…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ This is untested but shared this as someone might be interested in testing it. X axis conversion from linear rail and extrusion to linear rod. Uses standard MGN12H…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I'd recommend printing in PETG at least. I've orientated all the parts ready for printing. This is compatible with my RenderXY modification. If you've managed to…
Swapped to the voron mantis toolhead on my enderXY. The fan shroud hits the screw so this prevents it from doing that.
