Disassembly tool for Baader Planetarium Laser Collimator Mark 3 rotary switch in case of a loose contact
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disassembly tool for Baader Laser Collimator Mark 3 to remove the nut at the rotary switch at the battery insert.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v3.0
Disassembly tool for removing the sleeve nut on the battery insert, which is required in the event of problems with switching on the laser due to a loose connection.
Suitable for flat-blade tool screw driver bit 5 mm with total length ~ 25 mm.
Printing
~ 14 grams. PETG recommended, Nozzle 0.4 mm, Layer height 0.2 mm, 3 wall lines, alternate extra wall ON, no brim, no support, infill pattern triangles, infill density 35%.
Fit
In case the hexagon pockets are too small, either change the FreeCAD model to your needs or scale the model a little bit in the slicer (~ 1-3 %).
Fixing the loose contact
In my case cleaning the small wire, contact spray on the "contact screw" (hex head socket) and also on the battery cover helped.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work