Zius BK1s Mag Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed of Jian He Zhuang BK1s mag sleeve. I made the top part tapered so that you can use it with a flared magwell
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remixed of Jian He Zhuang mag sleeve for the Zius BK1s. His version can't be used with a flared magwell and also was a little too tight printed with my Ender 3 v3 SE.
I made the top tapered so that it can be used with a flared magwell and enlarged the inside walls. It's still tight fitting and will need a bit of force to fit it in, but no need to be soaked in hot water. Unfortunately you won't be able to use one of those extenders. I would suggest to print one of those shorten spring guides instead (link below).
Shorten spring guide:
https://www.printables.com/model/1011999-zius-bk12s-15-round-extender
I printed with 15% infill, 4 walls and with tree support only at the bottom. Depending on how good your adhesion is, I printed mine with raft.