Switch 2 - Joy-Con 2 Stick Transport Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protector to prevent the Nintendo Switch 2 Joy-Con 2 sticks to move during transport
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 452
- Wydruki
- 1
- Wyświetlenia
- 1295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This protector is intended to slide under the Joy-Con 2 joysticks during transport to prevent the sticks from being pressed and moved. This should make the joysticks last longer and delay the development of stick drift.
Print settings:
- Layer height: 0.15 mm or 0.2 mm
- Material: PLA
- Infill: 15-20%
- Print with the top (most surface area) on the print-bed
- Ironing can provide a smoother surface to prevent scratches on the Joy-Cons
Make sure the final print's height is at most 4.2 mm, otherwise you might damage your Joy-Cons. The protector should easily slide on and stay, do not force it under the joystick. Sand your print down if necessary.
Only fits the Switch 2 Joy-Con 2, not the Switch Joy-Con!
Created with FreeCAD 1.0.0 (file provided).
Printed on Prusa i3 MK3S+ with Prusament PLA Prusa Orange.