1 / 4
Hyundai Ioniq AE LiFePO4 Battery Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to fit a compact LiFePO4 100Ah battery in tilted position into the Hyundai Ioniq (2016-1019).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder to fit a compact LiFePO4 100Ah battery in tilted position into the Hyundai Ioniq (2016-1019).
It can be clamped into the original battery holder and uses 3 lashing straps with a width of 2.5cm to strap down the battery.
I highly recommend covering the battery contact areas and the base surface with self-adhesive 1mm EPDM foam rubber to avoid sliding.
Make sure to use some heat resistant material, depending on how hot your location gets.