Liczymy pasujące modele…
The IONIQ 5 is a great car (in about every aspect that matters to me), but there is one little thing that is a bit annoying: It only features a single USB data port combined with the need of using a dongle for wireless Android Auto /…
Got tired of my phone occupying the cup holder, so I made this bin that clips onto the cup holder. It also solves the issue with the car play cable lying on the floor. Now I can easily drop my phone into the bin and plug it in without…
This is a sunglasses holder designed to be mounted on the Hyundai Ioniq 5's magnetic mount. Uses three 3mm X 8mm neodymium magnets. Print with the flat side down, no supports needed. There are 2 different files depending on how you want…
I love going on road trips in my Ioniq 5. However, I always face the challenge of not having a good place to store trash during my travels. So, sketched this, fits perfect in the centerconsole. I printed with 0.6mm nozzle and 0.48mm layer…
Lets face it, as the wireless charger is crap in the Ioniq 5 I modeld / remixed an magsafe mount for the bottleholder middle console. Here a small video about its fit, I think I will use some velcro to secure it a bit more I use the Anker…
Hyundai Ioniq 5 dash magnetic glasses holder Printed in two pieces with tenon to join them. I used superglue gell to build mine. Uses two 8 mm x 3 mm magnets OpenSCAD source included for mods and to adjust to your magnet size
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
This is a Hyundai Ioniq 5, a very cool looking car, I have made it 3d printable just for you. Happy Printing! Link to original model: Hyundai Ioniq 5 - Lowpoly - Download Free 3D model by andikapratamaw (@andikapratamaw) [675e783]…
Features: Easy to install Standard 17mm Ball head mount the phone without hiding the screens Steps: The mount uses two parts: 1. Main body that connects to dashboard 2. Part two has a 17 mm ball head that can connect to any standard phone…
This should fit fairly well in the center console with its default parameters. As configured, it isn't snug within console cubby, but it does fit perfectly on the beveled, rubberized mat in the center console. If you keep the mat in the…
Wanted something to store sunglasses without scratching. I then stack 8 magnets (4 double stacks), superglued on. Printed mine with PA6-GF from Bambu labs, on an X1C. Inspired by:…
Update 10/18/26: Here is a link to my Magsafe version - LINK Update 1/16/25: Refined shape of Dual Rings, now with a version including a USBc port for charging or lighting. Notes below. Update 12/9/24 : Dual Rings! and printed in ABS.…
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Hyundai Ioniq 5. Fits underneath the storage area in the console. My car has the sliding console, I am unsure if this will also fit on the fixed console. I…
Designed for 2022-2024 IONIQ 5. Flip horizontally in your slicer for the other side of the car. I put support blockers under the overhang, most modern printers should be able to handle printing the overhang without supports. I left the…
This is a small under-dash storage tray for Hyundai Ioniq5s. It adheres to the bottom of the dash using VHB foam tape strips. It can hold small items like parking garage tickets, keys, nick nacks, etc. Edit: I've added a second STL that…
My Ioniq 5 charge door was way too hard to open using the “button” on the charge door. To be clear, the way the charge door is designed, there's a little nub inside the door that presses on the actual button to open it. (The nub presses…
A simple light cover to block the light from the charging port. At night, the blinking light can be quite annoying. *Remember to remove it before closing the charging port door!
Anyone who has tried to change the lowbeam bulb on their Hyundai Ioniq knows all too well what a pain it is to get out. Created this tool to slide onto the plug for the bulb, which allows you to use a standard 1/4" socket to remove it and…
A phone holder add-on for the Hyundai Ioniq 5 (MY2021-2024) that sits behind the cup holder and should fit almost any regular smartphone. The phones sit angled so that they don't move around too much when accelerating / braking.…
EV charger support for Hyundai home plug charger. Easy to put and remove. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: None PET or PLA Blue Category: Automotive
Many of the phone holders for the Hyundai Ioniq 5 either block the air vents or the screen. I designed this phone holder to slot into the unused space between the cup holders in the center console and keeps the phone in easy reach and…
I thought that the under dash tray was very usefull, but on some toll streets it is usefull to have a handy cardholder for credit card or toll billets To mount put double sided tape inside the small joint on top and press it with some…
Cell phone mount for door side panel on the dashboard. Angled towards the driver, but not adjustable. Made for the Pixel 6a, but should fit any type of similar size. Slider is held in place by a rubber band on the back (will probably have…
Some Ionic-5s have an annoying rattle coming from the trunk lift gate making side-to-side movements while driving. Some dealers will help with this, but I decided to try with some simple shims after hearing how it is handled by the dealer…
Recommend printing it with supports in PETG
We bought a new (to us) 2019 ioniq. I like to keep my pocket context small and light and the keyless entry fob just seemed huge so I designed and printed this one. Use at your own risk. This fob does not hold the physical emergency key. I…
The original cover on my valet key came off and was lost. I thought it would happen eventually since it is not that secure. I designed a replacement for it and it has been working rather well for the last 3 months. I tested the fit on…
Hide bright led when charge door is open. Can stay in place when door is closed.
Center console additional phone holder and other things. Keep in mind that it must be mounted with two M4 x 20mm bolts on the original console. If one day you decide not to use it, the mounted console can be covered with the "cover".…
The door handle on my 2017 Hyundai Ioniq (hybrid) has a button used to lock or unlock the doors. One day I drove home and when i got there the button was gone. It appears this is part of a small electronics board in the handle that has a…
If you don't need buttons on your key fob. This case only provides basic functions like unlocking, locking and starting the car. No interactions with the key itself needed. The model is designed for the key fob variant with 5 Buttons. To…
If it clicks the charger sits.
I got a Auto-Vox T9pro digital rearview mirror and dash came. The mount that came with it would move very easy if it got bumped and it did not look great. I made a mount that looked like it belonged on the car more. Printed in ASA used 6…
Magnetic holder for one or two pairs of sunglasses on any magnetic surface, such as the magnetic board in the Ioniq 5. Based on aspects of maxxscholten 's design. Takes 4 8mm diameter by 3mm thick rare earth magnets. Print in whatever…
Simple print to keep the phone in place on the wireless charger so it doesn't constantly slide off. Surely works for other iphones also. Had to print with support. Added a potential design for a RHD version, which is the known OK LHD…
Cover for Ioniq 5 charging light. Created this one so it can be pushed into the holes of the charging port. Drew inspiration from grothauu 's design link https://www.thingiverse.com/thing:4944377 . It is not a remix since the dimension…
The 2025 Ioniq 5 has a redesigned front console compared to previous models, so my older cup adapter wouldn't work in it. I designed this simple cup extender to fit my Yeti insulated water bottle; if you want a different size, you can use…
Box für die Mittelkonsole im neuen Ioniq5 N-Line zum aufbewahren der Ladekarten und Euro Münzen. Gedruckt mit XPETG matt von Extrudr mit einer Schichthöhe von 0,1mm damit kein Stützmaterial benötigt wird. Die Einleger sind mit TPU…
Easy dock to “auto” connect to CarPlay / Android Auto by just putting your phone in the dock. A phone dock made to fit the cup holder on Hyundai Ioniq 6. Tested with both iPhone XS and 12 Pro Max, but should fit most mobiles as long as…
I already made an MagSafe mount for the Cupholder of the IONIQ 5, yet it was really usefull, the looks always bothered me, and as the car already has a space for a wireless charger, (which never really worked well for me) so I made a…
i made an organizer for my ioniq 5 to make better use of the cubby in the center console.
Probably could fit tighter, but I don't hear it rattling around, so good enough for me. It is nice to have a little place to stash garbage for a few days till I remember to empty it. PETG suggested.
This is a “Stupid Nose” magnetic sunglasses holder for the Hyundai Ioniq 5. Uses three 8mm x 3mm neodymium magnets. Prints in two parts and glues together. Print with the flat side of the nose down and with the 3 hole side of the magnets…
This is my parametric adjustable magnetic garageopener holder for my Hyundai Inoiq 5, which fits on the dashboard. I printed it on my "Prusa Mini+" with "Prusament PLA Vanilla White" with minimal support (changed some distances to make it…
A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…
Cup holders are not the ideal place for your coffee thermos or a soda bottle. The Hyundai has a mid console to which bottle holders can be attached. The bottle holder sits at the side of the lower tray of the mid console. A bar is…
Taking kids to drive through usually proved an inconvenience because there was nowhere to store my credit card with easy & fast access. So I made a magnet CCard holder. Then I decided to add my phone to the holder. About 4 changes later,…
I purchased this VeCarTech cargo cover for my 2022 Hyundai IONIQ 5 as it was less expensive than alternatives. But, the ends that hook in to the slots on the car are too thin/narrow so the cover sags when in place (see before picture).…
Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…
This goes on the left side of driver's cluster on the metal/magnetic plate. I use MathyV's original hanging clamp as the basis, but modified the mounting features to accept Peak Design's Slimlink car mounts instead of the ProClip/Brodit…
Ioniq 5 has little connectivity points for accessories. The main bracket of this design fits over the center console and has two “tongue and groove” connectors for accessories. One is a iphone holder that is designed to accommodate either…
Every time I go to buckle my son into his booster seat, the buckle is running away from me. This TPU wedge goes into the space where it wants to pivot down. Now it stays proud and I can wrangle the small boy faster! It is a loop which…
Remix of https://www.thingiverse.com/thing:5184611 – for small magnets (<6mm diameter, height <2mm) Done with (3) negative volumes, so you can edit it right away for your magnets at home or if you just want to use 1 magnet or so.
This is a cupholder inlay that fits into the cupholders in an Ioniq full-electric from Hyundai. It contains a slot to hold the car key and a slot to hold for example a parking card or the charge-card or something else. Additional designs…
Don't you hate it when your smartphone slides around in the center console on the wireless charger and stops charging? One little pull and the phone slides away - even more so if you have a smaller phone. Fear not - I have the solution…
Things were bouncing around the deep center console of the Ioniq 5N so I built a tray with dividers for the insider and top mini tray for small things. Printed with PETG to handle heat, but anything with reasonably high temperature…
I printed this with ASA so it would be heat resistant.
I tried to find a good solution for a mobile phone holder for the ioniq. It is not easy to fix it somehwhere without holes. But this solution works fine. You just push it between the cover and the radio frame. I made 3 sizes. You can send…
IONIC 5 charging port lights cover is a simple attachment that hides the glowing charging lights on the car if you want it to not draw unwanted attention or light up an otherwise dark environment. You simply hook the attachment over the…
Shrank it and flattened it to make it a keyring
I wasn't satisfied with the other solutions for sunglasses storage for my IONIQ 5, so I made this variant, designed specifically around the larger measurements of my cheap sunglasses. This was designed to make it very easy to slip the…
Drop-in adapter to fit Kenwood KFC-1698RS speakers into the rear doors of a 2024 Hyundai IONIQ 5 SE, with correct positioning against the door duct and weatherstripping seals on both faces. This adapter replaces the factory rear door…
Were not happy with the Nalgene Cupholders for my Ioniq 5 I found online, so I designed my own. Fits a Nalgene but also a small soda can. Locks with the existing pins in the cupholder and unlocks by twisting. Recommend using PETG because…
The OEM plate mount for the Ioniq 5 is not designed to fit the common sized NSW plates. This is a replacement to mount the standard “NSW Slimline” plate fitted with a black plastic surround. (375mm x 100mm, including the surround.) This…
Hyundai Ioniq5 magnet board glasses loops. Prints in two pieces. No supports needed. Print both pieces, drop in suitable magnets (magnet voids are 6mmx19mmx20mm). Add a few dabs of CA glue and slide on the top cover. The top cover has a…
The OEM plate mount for the Ioniq 5 is not designed to fit the common sized NSW plates. This is a replacement to mount the standard “NSW Slimline” plate fitted with a black plastic surround. (375mm x 100mm, including the surround.) This…
This bracket will allow you to replace the stock speakers in the rear doors of your Ioniq 6 without drilling holes. I designed it to be used with Kicker 51KSC6504 speakers and the screws they come with, but I have added the Fusion360…
Securely hold the charger adapters that come with your Hyundai Ioniq 5. This is a minimalist holder that you can put in your glove box that will hold both adapters. It prevents rattling and sliding around. I've printed in PETG with no…
I wanted to hold my sunglasses out of the way and not be sitting in direct sunlight. This guy has a curved back so he matches the underside of the ioniq 5 dash. If you want to make your own, the curve on the backside is a 20inch radius.…
I'd recommend printing in PETG since it's going to go inside a potentially hot car. It's also a (very) tiny bit wider than the gap between the screw holes so the flex of PETG is nice. I used 3 walls and 40% infill. I printed with the flat…
Die 3 Teile gehören zusammen und lassen sich einfach zusammenfügen. Gedruckt wurde sdas Ganze auf einem Bambu X1C aus PETG mit einem 0,16mm layer. Die Magnethalter nehmen 4x Durchmesser 27mm x 3mm Magnete auf. Diese habe ich mit einem…
When charging a Hyundai Ioniq 5, the charging lights are bright enough that people on the ISS are unable to sleep. Dogs howl, cats stay awake all night, owls fear for their lives and aircraft home in on the beacon. This little nadger…
Charging light cover for 2025 Hyundai Ioniq 5 with Eyelet to attach to charger. Remix info: I increased the size a bit to fully cover the 2025 Hyundai Ioniq 5 lights. I also added an eyelet to allow you to use some cord to secure it to…
If you own a Hyundai Ioniq 5 / Ioniq 5N / Ioniq 6 or Kia EV6 with ventilated seats and almost never carry any passengers in the back, then this is for you. Redirect your precious cold air from your AC to your seats by swapping your stock…
Cup holders are not the ideal place for your coffee thermos or a soda bottle. The Hyundai has a mid console to which bottle holders can be attached. The bottle holder sits at the side of the lower tray of the mid console. A bar is…
I designed this bracket as I wanted to have the MagSafe experience but with my Android phone, for easy attachment and charging in the car. Especially getting the curves of the center console right was very difficult but finally got I…
Ioniq 5 sunglasses holder for the magnetic spot on the instrument panel. Uses four 6x2.6mm magnets (what I had on hand). Fusion360 file included for customization. Prints in one piece, front side down. Might need to tweak settings to get…
My Ioniq 5 charging lights are much too bright. I have seen other models posted that cover them during charging but which have to be removed between uses so the charging door can close. I took one of those models and thinned it down and…
Simple replacements for the oil drain plug cover and oil filter cover on the belly pan of the Hyundai Ioniq hybrid and PHEV. Both covers use M6-1.0 x 25mm hex cap SEM screws.
I made two designs: Pixel H and the Four Dots (H in Morse Code) There are two sizes of each: Front: 186.2 x 93.1 mm Rear: 146.4 x 73.2 mm Each also has 2 versions: With locator/guide pins: matches Ioniq 5 emblems, makes lining up the…
This project provides a wall mount bracket designed to hold the Hyundai Ioniq 5 cargo cover securely when it is not in use. The bracket ensures that the cargo cover is kept safe and out of the way, preventing damage or unnecessary wear.…
Designed this part as a basis for a phone holder, but decided to release this as a separate part. It might be of help for if other people who want to mount something else to the center console. The phone holder will be released later on…
I had some printing difficulties with the original design when using my slicer. I decided to rebuild the model as cleanly as possible from scratch, using ro_qu's design as reference, but making some tweaks along the way. There is a…
This is a simple holder with magnets for the Ditec Zen4 garage opener to be used in the Hyundai Ioniq 5. Download the scad and use OpenSCAD ( https://openscad.org ) to adjust the variables to suit your needs Draw on support at the overhang
Used for a carseat cover for the ioniq 5. Place over the headrest holes and can be sewed over the cover.
This is kind of a mad project to get a better phone charger into my ioniq 5. Should you do this? Probably not, but if you want to, I have instructions a reddit post.…
Like Vegar, whose model this is a remix of, I got tired of my phone occupying the cup holder. But it blocked the release catch that allows the console to slide back & forth. So I remixed the original with a gap so that you can access it.…
Created a sun glass holder with a spot to fit a post it note and 2 pens. I glued 2 magnets on the back which I purchased off of amazon, link below. Be careful they are very strong magnets. Glue one at a time and make sure the glue is…
Ioniq styled keychain block for Hyundai electric vehicles.
I designed these mounting brackets to allow installation of Kicker 51KST2004 tweeters in place of the Hyundai Ioniq 6's factory tweeters more securely than using tape as is usually done. To put the tweeter in the bracket, put the tweeter…
Since getting my Hyundai IONIQ 5, I’ve loved every moment behind the wheel—except for one thing: no wireless charging for my iPhone . I found myself constantly plugging and unplugging cables. To solve this, I discovered an ideal space…
[DISCLAIMER - I take no liability for any modifications you make to your own car, and this information is provided without warranty.] Add 2x 40mm fans (e.g. Noctua NF-A4x10 5V (3 pin, without PWM control) to your Ioniq 5 to mitigate…
This adapter shifts the location of the rear license plate on the 2025 Hyundai Ioniq5. The design is for a USA standard license plate (California in this case). This is a cosmetic shift to allow the bottom of the license plate to better…
My eldest son designed this part for me when the original broke. Printed it using PLA, but that melted over about 3 months, so have recently made it with PETG to see how that will fair with the Californian heat.
added 2nd version that fits a pixel 8 pro with the stock phone case from google
I designed it for my Li-ion battery pack (Hyundai IONIQ 3S2P) to survive blackouts in Ukraine. Plastic cover is supposed to protect JK Bms BD4A8S4P electronics from metal debris. Bms size could differ a little bit, so I would recommend to…
3D scanned and reverse engineered frunk latch from my 2023 Ioniq 5 EV. Slight cosemetic differences from OEM part.
A holder to fit a compact LiFePO4 100Ah battery in tilted position into the Hyundai Ioniq (2016-1019). It can be clamped into the original battery holder and uses 3 lashing straps with a width of 2.5cm to strap down the battery. I highly…
This is a single print (255 mm wide) tray to help organize your Hyundai Ioniq 5 glove box. It has several divided sections to keep items secure and prevent them from sliding around. There is a cutout to allow for adding my Ioniq5 Charger…
I haven't used the wireless charging since my phone tends to get too hot, and I sometimes need to write things down. So, I created this solution. It fits perfectly onto the rubber NFC case, providing stability while writing and easy…
