1 / 2
Hyundai Ioniq 5N center console divider tray 2-part — zdjęcie 1
1 / 2

Hyundai Ioniq 5N center console divider tray 2-part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Center console insert with a lower and upper tray sections

Ocena
0 / 5
Polubienia
8
Pobrania
44
Wydruki
0
Wyświetlenia
400
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Things were bouncing around the deep center console of the Ioniq 5N so I built a tray with dividers for the insider and top mini tray for small things. 

Printed with PETG to handle heat, but anything with reasonably high temperature resistance like ABS should be fine as well. Printed fine on bambu H2D with a 0.4mm nozzle and full infill on the walls. Sparse infill at 20% gyroid worked more than well enough. Used PLA for support (auto generated) of the upper tray but anything that can be easily removed will work fine.

I added a 3mm adhesive-backed carpet to the inside as well as the bottom part of the upper tray to keep things from sliding around and making noise. https://www.amazon.com/dp/B07VLC416H

Tagi