Hyundai Ioniq 5N center console divider tray 2-part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Center console insert with a lower and upper tray sections
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Things were bouncing around the deep center console of the Ioniq 5N so I built a tray with dividers for the insider and top mini tray for small things.
Printed with PETG to handle heat, but anything with reasonably high temperature resistance like ABS should be fine as well. Printed fine on bambu H2D with a 0.4mm nozzle and full infill on the walls. Sparse infill at 20% gyroid worked more than well enough. Used PLA for support (auto generated) of the upper tray but anything that can be easily removed will work fine.
I added a 3mm adhesive-backed carpet to the inside as well as the bottom part of the upper tray to keep things from sliding around and making noise. https://www.amazon.com/dp/B07VLC416H
