Hyundai Ioniq Low Beam Bulb Change Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool that attaches to a 1/4" ratchet to help change the H7 lowbeam headlight bulbs on a hyundai ioniq.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 842
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Anyone who has tried to change the lowbeam bulb on their Hyundai Ioniq knows all too well what a pain it is to get out. Created this tool to slide onto the plug for the bulb, which allows you to use a standard 1/4" socket to remove it and reinstall it.
Hopefully it helps someone else save their fingers and knuckles when they need to change their own bulbs.
There are two files - they are identical, except one says "IONIQ LOW BEAM" on the bottom if you tend to forget what the custom tool in your drawer is for.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
Recommend printing at 100% infill if you're going to use it again - I used 5 perimeters, 0.2mm layer height with PLA.
Category: Automotive