2025+ Hyundai Ioniq 5 NACS Adapters Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Ioniq 5.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 244
- Wydruki
- 3
- Wyświetlenia
- 1739
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Hyundai Ioniq 5. Fits underneath the storage area in the console. My car has the sliding console, I am unsure if this will also fit on the fixed console. I attached this with double sided tape and it feels plenty sturdy.
You should print this with a heat resistant filament like PETG as the summer heat will deform this.
Print settings I used:
0.15mm balanced profile
4 perimeters
Gyroid infill
Printed with Overture PETG.
For dust covers try these out:
NACS (specifically, the no retention file)
J1772