Ioniq 5 Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount that you can use to mount a phone holder between the two screens on ioniq 5
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 321
- Wydruki
- 2
- Wyświetlenia
- 2932
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Features:
Easy to install
Standard 17mm Ball head
mount the phone without hiding the screens
Steps:
The mount uses two parts: 1. Main body that connects to dashboard 2. Part two has a 17 mm ball head that can connect to any standard phone mount.
- Print the two files found in the STLs folder
- Connect the two parts together:
Part 1 has a female mount to hold part 2 (the two parts have 0.4mm of clearance which you may need to change using the STEP and F3D filed)
you can connect the two parts using glue or you can weld them together with a soldering iron and some filament
3. Clip the mount to the dashboard by hanging it from the top and pressing the bottom part it should click in to place
4.Mount your favorite phone holder to the ball head
Its recommended to use filament like PETG for heat resistance
Use by your one risk