FLSUN T1 Pro Effector Cover Delete Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to allow you to run without the effector cover.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 545
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I got a clog and didn't want to deal with all the disassembly to get to it anymore so I modeled these parts so I could just leave the cover off. They're not pretty but don't seem to cause any problems.
The holes in the extruder fan mount are for M3 inserts and the one in the CPAP adapter is for an M2 insert.
I printed mine in ABS for weight and counting the inserts and fasteners it saves ~25g over the original cover.
The extruder fan mount attaches by sliding the front hole over an existing unused insert on the front of the extruder and securing with an M2.5 screw.
At the very least this let's you just open the side of the extruder to clear minor issues.
Supports required. I just print them like this.
STEP files attached in case someone who actually knows what they're doing wants to mess with it.
EDIT 6/18/25
Added Cable Brace v1 and dropped the second hotend fan entirely. I'm still testing this but there have been no issues after the first 20 hours of printing. This saves quite a bit of weight. It attaches in the same way as the fan mount.