1 / 2
Gridfinity Tray for Quinn 1/4" Drive Ratchet With Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Remixed this project to include 6mm by 2mm magnets in the base.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For this remix I added magnets to the bottom of the model. I use the Gridfinity system in my tool box and the magnets help the holders not move around as much. Every grid square on the bottom has four magnets but I only ever populate the outer squares and that seams to work well for me. This uses the recommended magnets for the Gridfinity system which are 6mm by 2mm.