CapSure - Bottle Cover and locked holder for the CMF Phone 2 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The perfect back cover for the CMF Phone 2 Pro to keep you safer on a night out. Simply unlock and pop onto your bottle!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The 'CapSure' Protective Bottle Cap for the CMF Phone 2 Pro:
One of the biggest concerns when going out to bars or nightclubs — especially for women — is the fear of having something slipped into a drink. I designed this product for my entry with the hope of tackling that issue directly.
The CapSure panel for the CMF Phone 2 Pro features a built-in universal bottle top that locks securely into the back of your phone, all while maintaining a sleek and minimalistic design.
When it’s time to head out, simply twist and release the bottle top using the ergonomic handle. The cap pops out and fits snugly onto most standard beer bottles. It’s designed to stay on tight — tight enough that anyone trying to remove it with malicious intent would cause enough of a struggle to draw attention. At the same time, it's easy for the user to pop it off, take a sip, and press it back on.
Once you're done with your drink or ready to move on to the next bar, just take the cap off, snap it back into the case, twist it to lock, and you're good to go — safe, simple, and discreet.
Print Instructions:
The whole print process is one of the simplest I’ve encountered.
Bottle Cap:
When printing the bottle cap, simply face it upright in your slicer and fill the inside with minimal support. It uses slightly more filament but ultimately leaves a much better finish on the model.
Back Panel:
Again, a very simple print. In your slicer, face the back of the panel down so the bottle cap holder is pointing up toward your nozzle. It will need a little bit of support on the baseplate and for the holes.
Print Times and settings:
Bottle Cap – 10 minutes, uses 1.2m of filament
Back Panel – 1 hour 10 minutes, uses 10.2m of filament
Both models were printed with 10% infill using a grid pattern, although other patterns should also work well. I used standard supports with build plate adhesion enabled. Wall thickness was set to 0.84 mm, and both top and bottom layers were set to 0.9 mm.
Potential Upgrades:
For the second version of the design, I’d love to explore a few potential upgrades, such as:
- A string loop hole for attaching charms or lanyards.
- An aesthetic pattern or texture to make it visually appealing as well as practical.
- A different material for the bottle top, like TPU, to improve flexibility and durability over repeated use.
- The addition of a glow-in-the-dark material to help users keep better track of their bottle in low-light environments.
These are all exciting possibilities for future iterations. For now, though, the current concept works well, keeps a clean and minimalistic design, and is quick and easy to print!
Dimensions:
The bottle Top holder is placed in the middle of the back panel and measures
80mm x 55mm x 8mm (13.6mm with the bottle top in the holder)