Miniature base magnet centering helper / priming assembly line
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small tool to help center your magnets on your miniature bases and/or form an assembly line for priming/airbrushing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for 5mmx0.8mm round magnets, but changes are easily made with Tinkercad should you need a bigger hole. If bigger magnets are often used, I'll gladly include files for that, remixes are also perfectly fine. If you have an RGG painting handle, you can print a replacement top and glue it to the desired piece as well so you have a dedicated assembly line holder.
Included files (some third party bases might require upscaling due to a more aggressive bevel, please measure them and compare with the below sizes):
- 40mm Base single, three and five piece (circle is 40.2mm to allow for clearance)
- 32mm Base single, three and five piece (circle is 32.2mm to allow for clearance)
Print settings:
- 0.2mm layer height
- 5% gyroid infill (or more if you want to)
Printed with Creality Hi and DeepLee matte black PLA @ 200ºC, your print temperature will vary.
I originally made it with Tinkercad late at night to magnetize my Terminator squad so I could airbrush all five of them at the same time to avoid having to clean my airbrush more than needed and I didn't find what I was looking for on other sites, so I'm sharing my creation with you.