Miniature base magnet centering helper / priming assembly line
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small tool to help center your magnets on your miniature bases and/or form an assembly line for priming/airbrushing.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for 5mmx0.8mm round magnets, but changes are easily made with Tinkercad should you need a bigger hole. If bigger magnets are often used, I'll gladly include files for that, remixes are also perfectly fine. If you have an RGG painting handle, you can print a replacement top and glue it to the desired piece as well so you have a dedicated assembly line holder.
Included files (some third party bases might require upscaling due to a more aggressive bevel, please measure them and compare with the below sizes):
- 40mm Base single, three and five piece (circle is 40.2mm to allow for clearance)
- 32mm Base single, three and five piece (circle is 32.2mm to allow for clearance)
Print settings:
- 0.2mm layer height
- 5% gyroid infill (or more if you want to)
Printed with Creality Hi and DeepLee matte black PLA @ 200ºC, your print temperature will vary.
I originally made it with Tinkercad late at night to magnetize my Terminator squad so I could airbrush all five of them at the same time to avoid having to clean my airbrush more than needed and I didn't find what I was looking for on other sites, so I'm sharing my creation with you.