604 models
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Upgrade your brush-cleaning routine with the Hairbrush Cleaner ! Featuring fewer, wider combs for a more robust and efficient cleaning experience, this…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
The Hairbrush Cleaner Mini is a compact tool designed to remove tangled hair from your brushes effortlessly . This smaller version of the original Hairbrush Cleaner uses less material , making it lightweight and travel-friendly – perfect…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Most of the airbrush holder on the market can be installed beside you at your desk. This is the case of the Iwata holder and other 3d printable models out there. I designed this one to be installable at either the back end of your desk…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a rack or stand for four Iwata airbrushes. I believe that it will hold many more brands as they are somewhat similar in size and design. Its well balanced and sturdy.
Print approx. €9.47–€11.57 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
First: This is not mine. I had several of these and overtime things happen, and I needed more. I couldn't find the design or print file, and went looking for it, and couldn't find where I downloaded it either. I finally gave up and tried…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
This is a remixed version of an airbrush holder. Base was shortened to allow brush to sit in holder, cup resting fully against front edge, with a rigid hose that drops off edge of table surface. Added curved edges on main body. Opened…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
Tip dry can occur during airbrushing with acrylic paint, causing the airbrush to splash. By using this air cap, the needle can be wiped clean with a cotton swab. The air cap can be used on a Fengda airbrush as well as a Harder and…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
A simple airbrush holder that clips onto your spray booth. Can be easily mirrored to print for the left side(as seen in cover photo).
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
For holding Tamiya paints, 3 10mm one 23mm, Qtips, pipettes clips and whatever you need. Even for the Mr Hobby bottle opener.
Print approx. €13.79–€16.85 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
small stand for you clip sticks, fits the usual metal sticks as well as the thicker bamboo sticks Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Category: Tool Holders & Boxes
Print approx. €7.97–€9.75 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Support to be fixed on a wall with 2 screws.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
A organizer to hold cleaning and maintenance bits and bobs and to hold airbrush parts while doing maintenance. It will hold a bottle of needle Juice, brushes, cotton Swabs. has cut outs for needle and various airbrush parts. A more…
Print approx. €10.05–€12.28 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
I embarked on this project to explore the potential of 3D printing in creating everyday objects. To my delight, I discovered that it's entirely feasible to 3D print a functional, aesthetically pleasing hair brush. This brush is designed…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
Here is a simple airbrush holder with a little shelf for paint cup or caps, etc. Simple and easy to print. Used snug supports as built in the 3mf file. Default print is right side. Do mirror for left/alternate airbrush.
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Lazy Sue is my first attempt at a "turntable" to aid my airbrushing work. It's still pretty much work in progress but it's usable - just stick your model onto the “plate”, fire up your airbrush and use one of your hands to slowly rotate…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Rotary disk for lots of usages, easy to print and build. Print instructions What you need? 1x 608ZZ ball bearing ( https://minm.xyz/9f0da7b8 ) Thats all. After print put bearing to bottom part with some power. Top part (small part )…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
When I airbrush, I weigh the paint and thinner to always spray the same mixture. Mixing colours by weight also always goes well. (Revell kits) I use a letter scale with a tolerance of 0.01 grams for this. To get the airbrush stable on the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
An expanded version of the original maintenance station. This also holds Tamiya silicone and sealant and a bottle of Badger Regdab airbrush lubricant.
Print approx. €16.00–€19.56 excl. taxPreliminary estimate for PETGSource material: PET
Update June 13th 2023: Significantly improved functionality. Do you have old Gerber baby food jars lying around? Do you wish you had an airbrush but don't want to spend the money? Turn two problems plus a 3D printer into a solution! This…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
This toothbrush holder attaches to your mirror, or other surface, with a 3M Command Strip. Uses the small 3M Command Strip (1.5cm x 4.6cm) It is in two parts to minimize stringing. The base has two variations, plain and smiley I have…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
A simple hairbrush hanger based on the model by Xammie. I have printed this model with Hot3d mat white PLA in a 0.3 layerheight, which is fine for me. The gcode does not include a skirt, this is not really necessary on my printer for this…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
FR: Juste une petite palette avec différents angles pour masquer certaines zones lors de vos peintures avec aérographes (ou pinceaux) EN: Just a small palette with different angles to mask certain areas when painting with airbrushes (or…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
This is a remix of the Glock Hairbrush model from @tonCZEk_350417 with two sides and three pegs which connect the two.
Print approx. €3.87–€4.74 excl. taxPreliminary estimate for PETGSource material: PET
Small and portable organizing tray to put airbrush parts when doing cleaning or maintenance. Stop those parts from rolling of the bench and disappearing into the unknown. Stl, 3MF, print files for PETG and PLA. Enjoy
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for PETGSource material: PET
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
A hairbrush for bald people
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
A simple hairbrush hanger based on the remix by ericvenneker. Can also be used as a squeegee hanger or for other tools and appliances with a hole larger than 4.5mm in diameter. I had troubles with the original model breaking off the pole…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
A magnetized storage bin for airbrush bottles (primer, cleaner, ...). You have to print this two times and then stack and glue and ideally screw it together. You need: 8x 6 x 2 mm magnets 4x M3 x 6 mm (or longer) screws 4x M3 nuts This is…
Print approx. €8.61–€10.52 excl. taxPreliminary estimate for one variant
Airbrush-Halter für Grocheer Airbrush mit Lidl Chio-Dip-Glas. Deckeladapter und Airbrush-Halterröhrchen ausdrucken. Loch in den Deckel schneiden (mit Teppichmesser o.ä.). Röhrchen in Deckeladapter stecken und mit Kleber fixieren und das…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
A magnetized storage bin for airbrush tools. This bin has a total height of 28 mm and the inner height is 26.8 mm. My Harder & Steenbeck nozzle and air head case fits perfectly inside it. You need 8x 6 x 2 mm magnets This is part of my…
Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant
A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
This is a little helper for Airbrush Holder and Cleaning Lid It is not so easy to find the position of the holes on the lid. This small print is a positioning guide. You can mark the lid and now where to drill or cut the hole.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
I found pulling the nozzle cap from the Harder & Steenbeck (Infinity or other similar style) airbrush a bit fiddly due to the high chrome finish so I designed this Puller. Operation is self-explanatory - just grab the Puller towards the…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
airbrush colors paint holder for TIMBERTECH paint
Print approx. €3.71–€4.54 excl. taxPreliminary estimate for PETGSource material: PET
Print this lid to create a convenient airbrush cleaning station from your empty Nutella jar! Description: Use this cleaning station with your airbrush, you can empty the leftover paint or cleaning solution into the jar. The outlet cover…
The 2 models give you the option of either having a free-standing one or one that has two holes to be screwed into a surface
Printing: There are no special printing requirements, NO supports . For example I print with 0,25 nozzle, 0,05- 0,07 mm layerheight, 2 perimeters, 20% infill. print max 3-4 layers. … I fix Mandala 01 Happy printing :-)
You just need to glue the Ballbearing outer Ring into the Turntable Part and the Bottom Part into the inner Ring of the Bearing. The Turntable has multiple 3mm Holes to put some sticks with parts you want to dry after painting. Also it…
2025-11-25 Before you print this please take a look at my new model. It as been redone from scratch to reduce the number of part and make the assembly much simpler…
Fit any airbrush but this one specifically designed for the Mr Hobby Procon Boy FWA Airbrush
This is a rework of my own model from thingiverse (from 2012). “cyclone to catch the spray while purging/cleaning an airbrush.” There may be some sputtering especially with airbrush nozzles bigger than 0.2mm. Prints without supports, a…
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the…
This is a remix of patprints verion of his desk clamp + the airbrush stand from BlackDemonStudio. The main reason why I made this model (2 variations) is because the BlackDemonStudio airbrush holder would slip a lot if you don't put some…
Could not find a pot that was heavy enough and stable enough for my workspace. So Fusion to the rescue. Made it as easy to print as possible with no supports. Print Settings 4 bottom layers 3 top layers 3 perimeters Printed with both a…
A stencil/Template for airbrushing Print instructions Category: Art Tools Summary A stencil/Template for airbrushing Print Settings Printer: Da Vinci 1.0A e3d v6 repetier Rafts: No Supports: No Resolution: 0.2 Infill: 30%
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
New spray BOX for airbrush (250x250x400mm). The printing took almost four days and it consumed about 1.5Kg of PETG filament 🙀. Two 120x120x38mm fans are used, 3100 rpm and 138 CFM air flow. 3x40cm LED strip (the middle one is switched on…
Remix to fit my local brand airbrush. It's JAS 118x series like airbrush. I made it slightly bigger. Also made it snap-on. It's 11.5mm hole. To tight fit i heat it a bit with gas lighter. Supports needed. Orca slicer tree auto support…
Sometimes sharpies write a little too sharp. This airbrush mod fixes that by makes sharpies able to draw nice noisy airbrushed lines. Simply attach a straw that you can get with a drink at any fast food place and blow through it. The…
Paint mixing container suitable for airbrush. You can find another model here: https://www.printables.com/cs/model/364157-airbrush-paint-mixing-container-version-2
Camouflage Stencil Template for Spray / Airbrush / Painting Size 150x170x1 mm. You can resize it in the Slicer
The 3D-printed dragon clip (alligator clips) is a useful tool for securing small components. It includes a head, rod, and base, with an optional cylinder for added grip. The head holds small items securely. The assembly is simple, and it…
Single Airbrush stand with small compartment in base Layer height: .3mm Supports: No Plate Adhesion: Brim Filament: PLA
This is a simple yet effective holder for the most common airbrush and airbrush compressors out there.The diameter for the attachement point to your compressor is 30,5 mm. If you like this model consider becoming a Patreon:…
Printing time around 1.5-2h. Printed with PLA without supports.
Orient and print in vase mode to create a small mixing/pour cup. Or, orient with the large side (top) down, to print template for vacuforming. I used PLA with 4 walls, 6 top layers, 50% infill and there's no deformation of the templates.…
This tripod-style airbrush holder is a sleek design that holds your H&S airbrushes, standing firmly on your desk with fully protected tips. The best print option would be to print in PETG with high infill, to get a better chemical…
Use this model for a doll scale or human scale Barbie hairbrush!
A generic lid for Jars (in this case a pickle jar) with a opening of 77mm and twist like closure Print both parts and glue them together. print with: PLA, layer 0.2, Nozzle 0.4mm
Airbrush paint mixing container - version 3, printing without supports.
This is for the generic airbrushes with the square piece where the air line connects. I find it helps with stability.
A whole airbrush/spray paint booth for $3?! Yep! (well, mostly 😉) (somewhat of a WIP, will update with more images once my own build is complete!) I wanted a spray booth for working on tabletop gaming miniatures, but didn't want to spend…
Ergonomic handle designed to help with hand pain on long painting sessions. Gives you secure grip of the airbrush even when holding very gently. Works also for people with hand mobility problems to help with a grip. Handle has quick…
This is another airbrush cleaning lid with a couple of modifications of my own. It is designed to fit canning jar screw caps and is best used on a 320ml jar. Modifications include: Off-setting the brush port to the left and further to the…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Different storage boxes that are stackable. The small size is 120x80mm and a inside height of 60 or 80 mm. It can be stacked on the the larger size (120x161x82) with a 1mm gap between them. This box can be stacked on the 241x161x.. box.…
Airbrush Stand for Badger Velocity airbrush, with a cap holder. Could also fit some other airbrush models - it's up to you to check, and you are welcome to let us know which ones, in the comments below. Confirmed Airbrushes These are…
clamp on desk airbrush holder suits my ebay airbrush , 12 to 38 mm gap for desk
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Reducer for mini Airbrush set with compressor ( Aliexpress ) from M7/0.75 to standard hose with G1/8 thread. I recommend to print with the lowest possible layer (0,12 or less) because of the very fine pitch of the internal thread. I was…
I created simple template for Blow Pen Maker or Airbrush with Paw Patrol according to picture on internet, because original template is from carton or stronger paper and after a few used is damaged... Print Settings Printer: Home Rafts:…
