Airbrush magnetized storage for bottles
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.61 – €10.52 net (excluding VAT)
For file: Airbrush Storage - Bottles print_0.6n_0.25mm_PLA_MK4IS_7h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.56 excluding VAT (range midpoint).
- Weight reported by the author
- 161 g
- Print time reported by the author
- 7.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A magnetized storage bin for airbrush bottles (primer, cleaner, ...)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A magnetized storage bin for airbrush bottles (primer, cleaner, ...).
You have to print this two times and then stack and glue and ideally screw it together.
You need:
- 8x 6 x 2 mm magnets
- 4x M3 x 6 mm (or longer) screws
- 4x M3 nuts
This is part of my magnetically stacking “Airbrush Storage” system.
Check out more parts for this system and my other airbrush models here on printables.
