1 / 3
Airbrush cyclone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps cleaning an airbrush.
- Rating
- 4.792 / 5
- Likes
- 466
- Downloads
- 1,819
- Makes
- 26
- Views
- 14,749
- Reviews
- 24
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
This is a rework of my own model from thingiverse (from 2012).
“cyclone to catch the spray while purging/cleaning an airbrush.”
There may be some sputtering especially with airbrush nozzles bigger than 0.2mm.
Prints without supports, a filament/profile with no stringing is recommended. There is now no easy way to remove any stringing from the internal cavity.
Version 2.1:
- Smaller diameter, this seems to be better
- Added a funnel on the top
- Tested with an airbrush with 0.4mm nozzle, 2.5bar and plain water. This filters out ~98% of the water.