T-Slot track for Einhell TC-TS 2225 U table saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-Slot track for Einhell TC-TS 2225 U table saw
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed T slot tracks for my Einhell TC-TS 2225 U table saw, so I created some. There are two versions, one for screwing on jigs, the other one to replace the track for the miter jig. there is a slot for a M6 nut. In both versions, the middle slot is designed to fit the nub from the original miter jig. Let the build plate cool down after printing, so the track does not bend on removal. The M6 nut can be pressed into the slot and the M6 handle screw screwed in from the other side to pull the nut flush into the print.
This model is also compatible with my upcoming upgrade miter jig for the same table saw.
If you like my work and want to support me, please consider boosting or buying me a coffee :)