Easy multicolor chess board for Joe Turner’s chess ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multicolor chess board that is easy to print even with a single extruder and compatible with "Joe Turner’s Chess Ring"
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a multicolor chess board that is easy to print even with a single extruder and compatible with the very cool "Joe Turner’s Chess Ring" by @DrOperator.
Note that this is not a remix of the original board but instead a new design, compatible with the original one, designed so that it can be easily printed with a single-extruder.
How to print:
- Setup a “multicolor" printer (as described in this post for example).
- Merge the
black-board.stlandwhite-cells.stlfiles on the build plate (as described in this post if you need help). Turn them 180° to print them upside down. - Use 0.25mm layer height for the print.
- Put the black material to start with in the printer.
- You can ignore the warning at the start of the print about a missing material (this is expected)
- When the printer asks for a color change, put the white material.
- Then when it asks for another color change, put the black back and let the print finish.
You can also use the provided .3mf file for a ready to use project or the provided g-code for a CoreONE printer for a ready to print file (meant to be used with PLA).