Easy multicolor chess board for Joe Turner’s chess ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multicolor chess board that is easy to print even with a single extruder and compatible with "Joe Turner’s Chess Ring"
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
This is a multicolor chess board that is easy to print even with a single extruder and compatible with the very cool "Joe Turner’s Chess Ring" by @DrOperator.
Note that this is not a remix of the original board but instead a new design, compatible with the original one, designed so that it can be easily printed with a single-extruder.
How to print:
- Setup a “multicolor" printer (as described in this post for example).
- Merge the
black-board.stlandwhite-cells.stlfiles on the build plate (as described in this post if you need help). Turn them 180° to print them upside down. - Use 0.25mm layer height for the print.
- Put the black material to start with in the printer.
- You can ignore the warning at the start of the print about a missing material (this is expected)
- When the printer asks for a color change, put the white material.
- Then when it asks for another color change, put the black back and let the print finish.
You can also use the provided .3mf file for a ready to use project or the provided g-code for a CoreONE printer for a ready to print file (meant to be used with PLA).