Audio Receiver Box for DIY Bluetooth Speakers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Audio Receiver Box for DIY Bluetooth Speakers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This enclosure was designed for this specifi bluetooth audio receiver / speaker driver board. Our application is for a bath speaker that can be controlled by bluetooth. There is a window for the IR remote. you can leave it open or use the clear petg window from the second print profile. There are also optional angled stands that slot in to the back of the box which pivit the box to 45°.
The print profile for the clear PETG window uses Bambu PETG translucent. There is a plate with a rectangular test piece, the actual modeled window is on plate 2. You will need to post-process the print, use a knife to trim the edges and sides. when cutting chips from the print, it will get clearer. This profile uses ironing on all layers, so make sure to clean your nozzle afterwards. If after the transparent print your printer starts failing prints, run all calibrations your printer offers on-device.
If you like my work and want to support me, please consider boosting or buying me a coffee :)