1 / 1
GT2 Belt Tension Meter 5 bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearings!
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 229
- Wydruki
- 6
- Wyświetlenia
- 2151
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (1)Kolekcje (134)Powiązane
Assembly Guide https://github.com/Diyshift/3D-Printer/tree/main/GT2%20Belt%20Tension%20Meter
use five bearings to make it super smooth.
Printed in ABS/ASA with 30-40% infill, 2 or more walls, and 0.2 mm layer heigh except 0.1 mm for needle. Use 0.4mm extrusion width on a 0.4mm nozzle.
BOM
- Five 623-2RS bearings
- Four Countersunk M3x8 Screws or longer
- One M3x10 Screw or longer (Recommended Nylon)
- One M3 nut (Recommended Nylon)
- One M3 1mm spacer (Recommended Nylon)
- Two M2x10 Socket Head Screws
- 6mm OD x 0.6mm wire dia. x 50mm free length compression spring
- White lithium grease