Hue Play Light Mount Adapters (0 and 90 degrees)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount adapters for the Philips Hue Play light bars. Intended to mount to a simulator 4040 profile rig (M8 bolt).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts for the Philips Hue Play light bars. Originally intended to mount to a simulator 4040 profile rig (M8 bolt). Utilizes the original M3 bolt included with the Hue Play bars (that otherwise would be used to mount to their included sticky mounts).
Originals printed with PLA+. Supports are recommended, and snap off cleanly (with PLA), but it may print fine without them depending on your printer and filament choices.
NOTE: only the “TOP” version was extensively tested. Other than the 90 degree orientation difference they are identical models, but if you try the “SIDE” version, please let me know how it goes.
Link to the Philips Hue Play Light Bars: https://www.amazon.com/Philips-White-Color-Ambiance-Double/dp/B07GXB3S7Z?th=1