Track Saw Rail Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable track saw hinge for Festool/Makita rails, cuts up to 60 mm.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 1629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my version of a height-adjustable track saw hinge made mostly from 3D-printed parts.
It fits Festool guide rails and should also work with Makita rails, as their dimensions are nearly identical. Compatibility with other brands may be possible as well.
The system allows cutting material up to 60 mm thick, which should be sufficient for most track saw applications.
It is designed to mount onto aluminum profile rails installed horizontally at the front and rear of a workbench.
Depending on your specific workbench setup, you may need to adjust the mounting hardware accordingly.
The front and rear printed mountplates are 20 mm thick and support 8 mm screws through vertical mounting slots.
I've included the STEP files for remixing or modifications. Feel free to adapt the design to your needs.
To assemble this system, you’ll need to print all parts listed in the print list and source the necessary fasteners, a PTFE rod and a steel shaft as specified in the bill of materials (BOM).
Print List
| Filename | Amount |
| FrontMountPlate.3mf | 1 |
| FrontMountRail.3mf | 2 |
| FrontPinSlider.3mf | 1 |
| RearMountPlate.3mf | 1 |
| RearMountRail.3mf | 2 |
| RearHinge.3mf | 1 |
| RearSlider.3mf | 1 |
Bill of Materials (BOM)
| Material | Amount |
| M4x30 Hexagon Socket Head Cap Screw (ISO4762) | 8 |
| M4x12 Hexagon Socket Head Cap Screw (ISO4762) | 2 |
| M5x10 Hexagon Socket Head Cap Screw (ISO4762) (Slider Pin) | 1 |
| M8x16 Hexagon Socket Buttonhead Screw (ISO7380-1) | 2 |
| M8 Nyloc Nut (DIN985) | 2 |
| M4 Nyloc Nut (DIN985) | 8 |
| M8 Washer (ISO7089) (for Starknob) | 2 |
| M8x35 Starknob with 30mm knob diameter | 2 |
| M8 T-Slot Nut (Ganter, GN-I8M8) | 2 |
| 500mm PTFE rod 5mm diameter | 1 |
| Steel Shaft, 5mm diameter, 100mm length | 1 |
Front Assembly
This is the front part assembled.
Cut the 500 mm PTFE rod to the required length for each side, ensuring a snug and secure fit.
Rear Assembly
This is the rear part assembled.
