1U Wall Mount Network Equipment Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to mount any 1U network equipment to a vertical surface/wall.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 264
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to mount a 48 port 1U network switch to a wall. There are solutions for this use case, such as vertical mounting options. But I needed a solution same day and nobody around me carried the hardware. So I whipped these up. They can accommodate any object that is less than or equal to 1.80" thick.
Network equipment has some general standards for thickness and other parameters.
1U is considered 1.77"
You can print as many as you need for your use case.
Designed for #6 Drywall Screws
15%-25% Infill
Print on its side profile for no supports.
Cheers! Rate/Save/Post a Make!