Gaggia Classic Pro funnel (no support) and blanking plates.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement funnel for the Gaggia Classic Pro/Evo/E24
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 3
- Wyświetlenia
- 1149
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend the PEX version as it has a better seal against water leaks and PEX is available at most hardware stores for less than the stainless tube.
Gaggia Classic Pro funnel (no support) PEX tubing version
All versions use the original screws. the larger screw holes have a thin layer blocking the hole this is normal to improve printing without supports and the screw will just push thru this layer
The funnel needs a 15mm pipe 150mm long and you will need to print the funnel, a compression ring and the nut.
The lid prints right side up “small side down”
The GaggiMate logo blank can be printed as is for an embossed look or can be imported to the slicer with the text.step file for multi color prints.