Liczymy pasujące modele…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Before pushing the display into the housing, please make sure that the flat cable is centered over the cut-out. It is best to familiarize yourself with the installation instructions before installation (found in the files). All smthng…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
This case fits the Gaggimate pro board. It allows the board to be attached to the rear of the case.
I modified the original housing to better suit my needs. This is for the original 2.1" Lilygo screen. I printed both parts in PETG just as they are saved in the STLs, for the back I used a 5mm brim with 0mm gap and manually added…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Base housing of the smthng display housing 3 (with frame and back clip) for GaggiMate . This version has no brackets and is therefore perfect for remixing or attaching to flat surfaces. To do this, add holes for screws in the slicer, for…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
⚠ This print is for an application that involves mains voltage. Make sure there are no exposed wires and take the necessary precautions! Be aware that there is a risk of electrocution or fire. ⚠ This is an enclosure for mounting the…
Electronics box for Gaggimate mod on the Delonghi ECP 4x M3x6-8mm optional for lid. 2x M3x6-8mm needed for the board. 2x M4x6mm for SSR
This model allows you to replace the funnel of a gaggia evo pro with a flush display mount for the stock lilygo t-rgb that comes with the gaggimate.
A remix of the GaggiMate pro pcb cover that will print with out supports. You will still need the base available from the projects GitHub HERE Thanks to all the GaggiMate team for being so friendly and helpful.
A remix of the GaggiMate pro pcb bottom. You will still need the cover available from the GaggiMate GitHub or you can use this remix for an easier no support print. Superglue or epoxy the 6x3mm magnets into the underside and then assemble…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
For gaggimate-pro-rev1 PCB housing Simply screw on during installation with a screw from the cover of the Gaggia. After installation, the holder can be cut off or used for cable routing (I personally use it for cable routing). Can also be…
No longer current, version 1.6 of the “press fit” versions replace the “glue” versions, see table below: smthng display housings for GaggiMate: smthng display housing 1 (press fit) smthng display housing 1 (press fit and back clip)…
Before pushing the display into the housing, please make sure that the flat cable is centered over the cut-out. It is best to familiarize yourself with the installation instructions before installation (found in the files). All smthng…
A PCB case for GaggiMate Pro that allows you to mount the PCB on the outside of the Gaggia Classic at the rear. You might want to do this if you're struggling for space inside or want easier access to the USB port. The two halves of the…
An adapter for the stock 2.1" screen case or @0x64_2343909 's 2.8" Lilygo case that covers the Gaggia Classic switchbank for full touchscreen control. You can still access the power and brew switches if required. It attaches to the…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
An adapter for the @0x64_2343909 's 2.8" Lilygo case for Rancilio Silvia and Gaggia classic. I designed it because didn't find any alternatives. Optional space to glue 10x2mm magnets. My Rancilio Silvia is wrapped so let me know if you…
An adaptor for the stock 2.1" screen case that hooks onto the top lip and moves the screen down to cover the power switch for a cleaner look and easier access to the cup warming lid.
I modded the original cover to mimic the new open cover that comes with the kits. This is modded off the STL so there are small imperfections. I test fitted this on versions 1.0 and 1.1 of the pro PCBs. The top part is thicker for…
This case fits the Gaggimate pro board. It allows the board to be attached to the rear of the case.
CURRENTLY IN BETA PHASE: The current focus is on testing how well the frame fits onto the base. (The frame has a rounded underside, which I would like to retain as a design feature. However, this makes it somewhat challenging to design…
V2 (modular) available here Designed to be printed without supports. I used ABS but any high temp filament would do. I provided a step file to modify easier
Designed to be printed without supports. I used ABS but any high temp filament would do. .step file provided for easier modification you will need 2x m3 x 3mm heated inserts 2x m3 x 10mm screws
Now updated to fit with an installed SD card Screen Case and Mount for the Waveshare 2.1" Screen for Gaggia Classic E24 for GaggiMate. Needs 2-4 M2 Screws to hold everything together. I recommend using the new simplified screen mount. It…
I used a 2.8" display for my Gaggimate mod of my Gaggia Classic Pro. There's a couple of 2.8" display models around, but I decided to design my own. This case is designed to be used with the Lilygo T-RGB 2.8" full circle display or…
FDM Printable and SLS optimised versions of the front panel i made for Gaggimate intergration. The print requires some supports for FDM. Recommended placement and orientation (notice 2 slots with slopes pointing upwards) Remember to print…
I modified the original housing to better suit my needs. This is for the original 2.1" Lilygo screen. I printed both parts in PETG just as they are saved in the STLs, for the back I used a 5mm brim with 0mm gap and manually added…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Base housing of the smthng display housing 3 (with frame and back clip) for GaggiMate . This version has no brackets and is therefore perfect for remixing or attaching to flat surfaces. To do this, add holes for screws in the slicer, for…
Remix of smthng - takes 8 x 5mm OD x 2mm magnets. back removed for easy cable routing. Use smthng case aperture
How to print: Set the wall generator on Arachne and activate ironing if possible. Decals should look best/as original when they are painted to match afterwards. The images are currently placeholders, as I don't have a suitable paint yet.…
This is a badge to display your serial number after you success install GaggiMate in an espresso machine. You can get your own serial in the GaggiMate Discord. Badge is the same shape / depth of the badge on a Rancilio Silvia You can…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
⚠ This print is for an application that involves mains voltage. Make sure there are no exposed wires and take the necessary precautions! Be aware that there is a risk of electrocution or fire. ⚠ This is an enclosure for mounting the…
Electronics box for Gaggimate mod on the Delonghi ECP 4x M3x6-8mm optional for lid. 2x M3x6-8mm needed for the board. 2x M4x6mm for SSR
This is a custom mount for the gaggimate that allows you to use a 75mm hole saw to cut a hole in the side of your espresso machine to flush mount the screen for the gaggimate.
My take on the GaggiMate Pro v1.1 enclosure. Uses the original pro base available on the Gaggimate GitHub here: https://github.com/jniebuhr/gaggimate/blob/master/stls/pcb/gaggimate-pro-rev1/pcb_base_clipped.stl
This is an external "backpack" mount for a Gaggimate Pro PCB that mounts to the vent holes via 2x M4 screws for a secure mount. Feed your wires through the vents, possibly with some wire loom or wrap to prevent any chafing. Extras Needed:…
This model allows you to replace the funnel of a gaggia evo pro with a flush display mount for the stock lilygo t-rgb that comes with the gaggimate.
There is no guide that i know of so far so you are pretty much on your own, but there should be a guide coming in the future. This top replacement should slide in the same as the current one. It supports the Lilygo T-RGB screen only. And…
A replacement solution for mounting your Gaggimate screen on the top of the Gaggia Classic. I always wanted a screen that sat fully on top of the Gaggia Classic, but I also realized you'd need to butcher the stock top plate. So I decided…
Lilygo Screen Version A replacement solution for mounting your Gaggimate screen on the top of the Gaggia Classic. I always wanted a screen that sat fully on top of the Gaggia Classic, but I also realized you'd need to butcher the stock…
The cover was created with two ideas in mind: To hide the cable connecting the display to the PCB and to have a square housing that is more suited to the square machine than the original round display. However, the display needs to be…
I prefer to mount the Gaggimate at this position and made a quick remix of the great Gaggiuino screen mount.
Gaggia Classic - Gaggimate Switch Panel Mount. Designed for Waveshare 2.1inch esp32 screen. I wanted a more OEM looking mount for my Classic, and my switch block was failing anyway so I figured why not remove/replace it. All you really…
LILYGO T-RGB, 2.1 inch display housing mounted on the funnel cover (not yet tested print).
LILYGO T-RGB, 2.1 inch display housing mounted on top of the cup warmer (not yet tested print).
This is UNTESTED and EXPERIMENTAL. This was done at the prompting of Anthrox80 and TorxFighter from the Gaggimate Discord ECP discussion: https://discordapp.com/channels/951416527721230336/1378844857426251918/1524394854048731297 The…
