GaggiMate Pro pcb base clipped with holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original GaggiMate Pro v1 base with holder as installation aid (holder is not intended for final install)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For gaggimate-pro-rev1 PCB housing
Simply screw on during installation with a screw from the cover of the Gaggia. After installation, the holder can be cut off or used for cable routing (I personally use it for cable routing).
Can also be used to hold the case in place at the end, but a suitable position must be found for this, as the original cover with filling funnel of the Gaggia usually no longer fits.
Print like original
Original: https://github.com/jniebuhr/gaggimate/tree/master/stls/pcb/gaggimate-pro-rev1