GaggiMate Serial Plate Silvia Sized Magnetic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've taken @dubios42's Decals and turned them into a badge, the same size as the "Rancilio" badge on the Silvia.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a badge to display your serial number after you success install GaggiMate in an espresso machine. You can get your own serial in the GaggiMate Discord.
Badge is the same shape / depth of the badge on a Rancilio Silvia
You can customize and see some more options in TinkerCAD here:
https://www.tinkercad.com/things/h3tNaL2qKF8-gaggimate-
You have to pause to add the 6x2mm magnets, and then filament swap for the two tone. (Bambu .3mf provided for the GM Logo with number)
Since each person has their own number, you won't want to use the model uploaded, that's only an example, you would want to edit the TinkerCAD to add your own number.
If I were to print this again:
1: I would probably increase the bevel on the corners of the badge, the Silvia's badge is more rounded.
2: I would print the top layers in gray instead of white (White is a little rough against the chrome)