Waveshare Amoled 1.75" mounting bracket for Gaggimate Delonghi Linea Classic EM450.M
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket allows mounting a Waveshare 1.75in Amoled screen
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠ This print is for an application that involves mains voltage. Make sure there are no exposed wires and take the necessary precautions! Be aware that there is a risk of electrocution or fire. ⚠
This is a mounting bracket for fitting a Waveshare 1.75" Amoled screen into the stock pressure gauge mount of the DeLonghi Linea Classic (aka EM450.M).
I designed this for the Gaggimate conversion of my Linea Classic, which i wanted to keep as stock-looking as possible. Fortunately, that's quite easy with all the empty space inside the machines body and the design already incorporating a round, user facing dial!
Some notes about the design and printing:
The pin has been separated into its own part, to keep support usage down a little. It takes the place of the brass fitting of the original pressure gauge and keeps the screen centered and level when installed into the stock bracket.
The models are in their intended printing orientation, so supported faces are facing inside the machine.
I recommend cutting the bracket to parts at z=25mm and increasing the wall count to 6 walls for the upper part. This way, the supported faces should come out cleanest which should help with structural integrity and thus a clean front.
No supports are needed for the centering pin hole on the bracket.
Feel free to reach out if there's any questions and consider joining the Official Gaggimate Discord Channel!
Also, please check out my other Gaggimate-related designs, if you're interested.