Waveshare 2.1" Round Screen Case and Mount for Gaggia Classic E24 and GaggiMate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the nice case from Wujek_k on Thingiverse for the 2.1" round WaveShare Display for GaggiMate
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 1204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Now updated to fit with an installed SD card
Screen Case and Mount for the Waveshare 2.1" Screen for Gaggia Classic E24 for GaggiMate.
Needs 2-4 M2 Screws to hold everything together.
I recommend using the new simplified screen mount. It hides all the unused holes for GaggiMate for a cleaner look. I power the screen through the battery connection and it works quite well. However do not plug in USB power, as the screen will output >4V on the battery connector possibly damaging the GM PCB.
A better way would be to power it over one of the other 3.3V / 5V Connections.
Print the back part standing upright, support only on the ledge in the back works fine.
Printing it flat works as well, but removing the support from the gap is a pain.