Waveshare 2.1" Round Screen Case and Mount for Gaggia Classic E24 and GaggiMate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the nice case from Wujek_k on Thingiverse for the 2.1" round WaveShare Display for GaggiMate
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 105
- Makes
- 2
- Views
- 1,204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Now updated to fit with an installed SD card
Screen Case and Mount for the Waveshare 2.1" Screen for Gaggia Classic E24 for GaggiMate.
Needs 2-4 M2 Screws to hold everything together.
I recommend using the new simplified screen mount. It hides all the unused holes for GaggiMate for a cleaner look. I power the screen through the battery connection and it works quite well. However do not plug in USB power, as the screen will output >4V on the battery connector possibly damaging the GM PCB.
A better way would be to power it over one of the other 3.3V / 5V Connections.
Print the back part standing upright, support only on the ledge in the back works fine.
Printing it flat works as well, but removing the support from the gap is a pain.