Ikea Norden TPU feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy print to keep away moisture from Ikea Norden legs
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Having placed on the front porch an Ikea Norden, that should be kept inside, I decided to design some feet to prevent the table legs from coming into contact with moisture from the floor.
I prepared two different types of feet: a square one for the four center legs that are thicker and a rectangular one for the two folding extensions that support the extendable table tops.
The chamfered holes on the bottom of the feet help drain water, and the grooves on the part in contact with the floor ensure that it does not accumulate.
I printed mine in TPU with 3 perimeters and 50% cubic infill
I think it is possible to use other kind of materials
Please upload a make if you will try my model as I'm really curious to know your opinions