1 / 6
4040 Double-Slot Extrusion Clip-in Screw Anchor — zdjęcie 1
1 / 6

4040 Double-Slot Extrusion Clip-in Screw Anchor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clips into the extrusion and provides a slot for an M3 nut and a hole for an M3 screw to reach the nut.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This fits into double-slot 4040 extrusion, like on the sides of the Elegoo Neptune 4 Pro.  It has a slot for an M3 nut (the ones I used are 5.3mm flat-to-flat and 2.2mm thick, but slightly larger should work) and a hole for an M3 screw to engage with that nut.

Note that one of the four prongs has a different angle at the tip—that side should go in second and the other side should go in first.

Tagi