1 / 6
4040 Double-Slot Extrusion Clip-in Screw Anchor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips into the extrusion and provides a slot for an M3 nut and a hole for an M3 screw to reach the nut.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This fits into double-slot 4040 extrusion, like on the sides of the Elegoo Neptune 4 Pro. It has a slot for an M3 nut (the ones I used are 5.3mm flat-to-flat and 2.2mm thick, but slightly larger should work) and a hole for an M3 screw to engage with that nut.

Note that one of the four prongs has a different angle at the tip—that side should go in second and the other side should go in first.