GMT800 Wheel Nut Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wheel nut cover for GMT800 Silverado/Sierra 1500/2500/3500 trucks.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I modeled this just to see if it would work. I know you can buy them aftermarket but I feel that a 3D printed one would be more robust. I'm including the Fusion f3d files so you can modify the model to your liking.
Update: 6/28/25
The external threads on the lug nut are M27x2.0 but when I printed them they were too tight (might be my calibration) so I made the threads M28.2.0 and they worked a lot better. I added both models so that you can try both.
Update: 9/4/25
Mine failed under the hot summer heat with PETG so I had to reprint in PC. Hopefully Polycarbonate will hold up better.
UPDATE: 9/25/26
I played around with this some more. I changed the threads back to M27x2.0 and off set the thread faces by -.5mm for a better fit.