Liczymy pasujące modele…
This is a collection of parts I modeled out (just tinkercad) to mount emergency lights behind the headrests in the rear of a crew cab Sierra. I assume the double cab uses the same dimensions, but thats unconfirmed. The center seat I…
The pastic collar that engages with the reverse lockout cable in a mk2 Ford Sierra 4x4.
Printed beautifully with default settings in Orca Slicer. You can add ironing to the top layers as well for a nice, smooth finish to the lettering.
Finally solved one of the most annoying problems in my truck. I designed this cup holder extension in Tinkercad specifically for my 2015 GMC Sierra to handle what the stock holder couldn’t—larger coffee cups and big water bottles. This…
Ventilador de repuesto para el rotor electrico de la motosierra Castor 1800w. Recomendable imprimir en PETG o ABS. Pruebas con PLA dieron como resultado una pieza demasiado fragil.
Garbage hook v2 with TPU bumpers to avoid scratching consult
Used for covering up the lower dish in the 2014-2019 Sierra center console Printed with TPU, 15% gyroid infill, 3 perimeter walls
tengo una sierra de cinta de parkside y para aprovechar las hojas que se rompen hago estas herramientas que me son muy útiles en el bricolaje, y muy muy útiles a la hora de quitar los soportes de las impresiones 3d. A todas las…
Ive always hated having my hydroflask rolling around in my truck. Designed a basic extended cup holder to allow me to secure my hydroflask/thermoflask while driving. I found a lot of the other models around just didnt fit my vehicles cup…
If you are having trouble with the transfer case being stuck in neutral, you may need to replace the shifter bush. To remove the shifter bush, remove the boot on the inside of the vehicle, then remove the boot on the transfer case, then…
Capless gas tank cap. Was getting lots of sand and debris in the filler hole which lead to DTC small evap leak. Cleaned the doors (flaps) and printed this cap/cover to prevent further issues. Fits the 2018 gmc sierra 1500. Not sure of…
Holder for 17 mm sphere phone holder. A M8 screw is required for mounting the arm. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 Filament: Noname PETG grey Category:…
Various models in different sizes. Print what you like or change it to your personel keychain. Category: Keychains
This is a simple 2D model of the classic Ford Sierra 1991 , designed for 3D printing. The model is 10 cm long and can be used as a keychain , wall decor , or general decorative piece . It was originally created as a fun project to…
Center consult phone holder for GMC / Silverado pickup trucks
This is a remix of Penobscot's outstanding iPhone mount design. I added v-slots to the mount and v-posts to the back of the phone holder to allow for rigid assembly. With supports, I was able to print a great looking 2-piece assembly with…
Universal Bracket for mounting Ham Radio to the pocket of 14-18 GMC sierras and possibly 14-18 Chevy silverados as well. Printed on end in ASA to withstand the heat and UV of sitting in a car.
Stake Pocket Covers Custom Fit for 2019-2025 GMC Sierra and Chevrolet Silverado Truck Bed Rail, Rear Opening. This design snaps into place and sits flush with the top of the bed rail. Compatible Vehicles: The stake pocket covers are…
PLA u otro material, infill 50%, soporte solo para la pieza en forma de t
The linked model was mashed up with the model he drew the inspiration from (which was resized to match). The later generation truck uses the same vent size on both sides, so this model works on either side. It simply ducts the vents under…
Red Bull can adapter to the GMC Sierra EV cup holder, 83 mm tall and 68.5 OD. Holds 8- and 12-oz Red Bull cans. Check the dimensions to see if it can fit other makes and models.
Bed Rail Stake Pocket Covers for GMC Sierra EV Denali. Recessed print. Use petg or better.
This is a collection of parts I modeled out (just tinkercad) to mount emergency lights behind the headrests in the rear of a crew cab Sierra. I assume the double cab uses the same dimensions, but thats unconfirmed. The center seat I…
GMC Sierra / Chevy 1500 center console base mounting plate. Works for model year 2025 GMC 1500 AT4 and similar models. I have created several sets of files: 1_passenger_split_radio and 1_passenger_split_radio . Used to mount a Motorola…
I had a similar model to this for my wife's 2013 escape, as I hated having things roll between the front and rear cupholder, so having found a model to fit the Sierra, I jumped at the chance to whip up a very simple, but very handy model.…
Complete mountain range of the Sierra Nevada
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian and GM EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian and GM EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for…
The pastic collar that engages with the reverse lockout cable in a mk2 Ford Sierra 4x4.
Printed beautifully with default settings in Orca Slicer. You can add ironing to the top layers as well for a nice, smooth finish to the lettering.
A scan of the bed area of a Sj413. The poor thing is a bit hammered but its what I have to scan so I scanned it! It should help you design some stuff to bolt into the rear. Its a early 1988 samurai, should be the same as a Jimny and…
This is the rear scan of a 1988 Suzuki Samurai. Should be the same as a Jimny and a Sierra. I took this to design a bumper for it, and it should work for other needs as well. If you design something cool with it, share a pic!
I designed this clip after buying my GMC Sierra EV Edition 1 and receiving a soft tonneau cover with it. As soon as I installed the tonneau cover I could see how easily the front lip of the cover could (and did) separate from the front…
Finally solved one of the most annoying problems in my truck. I designed this cup holder extension in Tinkercad specifically for my 2015 GMC Sierra to handle what the stock holder couldn’t—larger coffee cups and big water bottles. This…
After failing to find a reliable 3D-printable bracket online, I designed this from scratch. Standard design rely on a plastic spring-clip lock, which is inherently fragile when FDM printed. This design solves that problem by using a…
Dual cup holder insert designed specifically for the GMC Sierra EV center console storage compartment. I printed with no supports, in PETG with 5% infill.
Ford Sierra RS Cosworth as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
3D printable topographic miniature of Freetown, Sierra-Leone - 🇸🇱 Sierra Leone Capture the beauty of Freetown, Sierra-Leone 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
Mountain range of the Sierra Nevada desert (USA) from Ridgecrest to Pyramid Lake.
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Sierra Cosplay Accessories from Overwatch. The supports required. Some…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Sierra Cosplay Helix Rifle from Overwatch. The supports required. Some…
Printed in ASA or ABS for external use and prevent sun warping. Ironing on top layers only Traditionally Grey raised lettering on Black base
This Awesome PDO was created by Monkeyfuj and very kindly provided by Sierra086 and the boys at the 405th http://www.thingiverse.com/SIERRA086/about Please check out Sierra086 brilliant work on this helmet done the good old fassioned way…
A CPU fan cover for a Thermalake UX100 CPU fan. Will need to be re-sized for use on other CPU fans Category: Props
This is Sierra Online logo with LEDs cycling through colors behind it. Print Settings Printer: Monoprice MP Mini Delta Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Inland PLA Black and White Notes: The logo piece is…
Wall bracket for Parkside Pneumatic Saw PDKS 6.3 A1 and some accessories. If you like my designs give me like and share. If you like them a lot invite me to a coffee. https://www.buymeacoffee.com/kjbturok…
There are three models here. Two of them are just emblems. The other one is a keychain. If you want to print these in two different colours as I did in this render, and you don't have dual extruders and need to do a filament change, keep…
I made this model to fix a broken transmission cable bushing on my 2012 GMC Sierra 2500 so that is the only vehicle I can confirm that it works on. I printed mine in PLA with 100% infill and it is working so far, not sure how long it will…
CHEVROLET SIERRA, K30 ATTACHING THE DOOR PANEL Türverkleidungsbefestigung Chevrolet K30, Sierra usw. Gedruckt habe ich die Teile 6 sind erforderlich mit PETG I printed The Parts 6 are required with PETG 100% infill 0,3 Layer mit 0,6 Nozzle
Modern radios in the Ford Sierra / Merkur don't need the fader joystick and some want a USB port or blanked off. This replicates the OEM cover 83-BG-13K-732-BA. If you have a right hand drive car, just mirror this model. I have included…
1st Tinkercad model I made and printed, just for learning experience.
The rear windows of extended cab Silverado/Sierra from 1999 - 2007 have a tendency to exhibit wind noise due to a poor design which prevents the window from being pulled tight against the seal. These longer latch links result in the…
My first design from scratch using, and learning, Fusion360. Printed in PETG to withstand California heat during the summer.
test perfil alar top flite sierra entrenador de 1200 mm de envergadura resolucion 0.44 un perimetro 15 pociento de relleno velocidades segun material.
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
Scaled to 102.5% of the original size as an option to friction fit instead of using electrical tape. I strongly recommend printing one first, test fitting on your vehicle, then adjusting the scale accordingly. Printed on a P1S using Black…
Printed in PETG for Temp and UV resistance. High Sierra Z Valve mouthpiece cover. Print open side up.
Se trata de un empujador para cuando se está cortando en una sierra de mesa. Inspirado en otros diseños caseros.
This model I created to mount the wideband in my GMC Sierra 2006.
A replacement handle for some 1999 to 2007 GMC and Chevrolet trucks. This is just the handle portion of the extended cab rear door latch assembly. A common failure of this part is for the lower lever arm to snap off. Print with ABS or ASA…
Ender 3 s1 con Sonic Pad Capas superior e inferior 3 Relleno 20% Paredes 3 altura de capa 0.2
2014 - 2018 GMC Sierra Console Bin Cover. Covers the small bin below the radio as a false floor. Print instructions Printed in PETG, but can also be printed in ABS, ASA, or Nylon A modifier was used to reduce the number of perimeters on…
08 Chevy Silverado GMC Sierra Key Fob- No Auto Start If you like what I'm doing here, please consider making a small donation .
This is a comically fast print (< 1 minute print time on a Bambu P1S with all the speeds turned down) that replaces a tiny little plastic part that is otherwise impossible to find. The Lightspeed Zulu 3, Zulu 2, and Sierra headsets all…
Este repuesto es para la motosierra Bauker a gasolina ZM4002 de Sodimac (código producto 2771713) 16" / 2HP / 39,56 cc pero puede que sirva para otra marca y modelo. Si encuentras un producto que cuente con la misma pieza, avisame y lo…
Lens Cover / Protector for Sig Sauer SIERRA6BDX 5-30X56mm Rifle Scope SOSBDX65111 This covers the rear lens and partially protects the bluetooth module. Front Lens cover is here: https://www.thingiverse.com/thing:5124514 Print Settings…
Lens Cover / Protector for Sig Sauer SIERRA6BDX 5-30X56mm Rifle Scope SOSBDX65111 Rear Lens cover is here: https://www.thingiverse.com/thing:5135155 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: 100…
Tired of placing things between your cups in your truck to have the fall over when you take a drink? This has worked out amazing so far. PETG is recommended as interior temps can get pretty high inside of a car. Infill doesn't matter much…
Created a custom wireless charger for my 2017 Silverado 1500. Charger used is the “313 Anker Wireless Charger (Pad), Qi-Certified 10W Max for iPhone 14/14 Pro/14 Pro Max/13/13 Pro Max, AirPods” (https://a.co/d/cy8rksi). This is the one i…
sierra montañosa ubicada entre el lago musters y lago colhue huapi en la localidad de Sarmiento
GoPro mount for attaching a camera to your DiveX DPV. Originally designed for the Sierra with a 200 mm tube radius, but will work on any scooter that has approximately the same radius. Attaches the body via an 8" / 20 cm cylinder clamp…
Esta es una herramienta de medición para calibrar la profundidad de corte o fresado, tanto en fresadoras como en sierras de mesa. Es una versión creada partir de un modelo comercial fabricado en metal, del cual pongo una imagen donde se…
I printed it in PETG in 2 pieces split vertically through the middle and glued both halfs together. A screw can be added for additional stability. You are not allowed to sell, reupload, modify, remix this file. (only for personal use)
I needed a phone holder for my truck, and the little pocket thing(?) that the manufacturer provided was basically useless space. So I found a few models that would fit that space well and then modified them to have a ram-style mount that…
Colector de polvo para sierra Makita grande. Se modifico la salida con un diámetros interno de 35,5 milímetros.
Adapter for a 24oz Takeya bottle to fit into a 2014 GMC Sierra's cupholder. This might work in other cup holders. Step file included as always to remix. I printed in ASA but I would recommend PETG as a bare minimum. Its a pretty snug fit…
Mejora para guia de sierra de banco Stanley STST1825-B2C destinada a ayudar con el encuadre a 90 grados y soporte, obteniendo un mejor corte.
