SIlverado-Sierra Phone Holder - Mashup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a phone holder, and whipped this up based on a few others
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 850
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a phone holder for my truck, and the little pocket thing(?) that the manufacturer provided was basically useless space. So I found a few models that would fit that space well and then modified them to have a ram-style mount that could hold a magsafe car charger.
This makes use of that otherwise unused space and provides me with a secure place to mount my phone without it being in the way.
The ball end is 17mm, and I bored out a 3mm hole that can be used wirth a bolt to strengthen up the whole assembly and prevent sagging in very hot climates.
Print this in PETG ABS or ASA for heat resistance.
I printed min in Kinluot PETG, 4 perimeters, and adaptive cubic infill in the shown orientation.