PCB organiser with handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray for organising small PCBs in a small cardboard mailing box.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Simple little tray for organising small PCB projects so I don't buy the minimum number, use one and then lose the rest on my desk forever. I dimensioned this specifically to fit in the little blue mailing boxes from JLCPCB, but other PCB manufacturing options are available.
Features:
- 135mm wide x 145mm deep x 8mm tall
- 2mm wide slots - the PCBs in the photo are all 1.6mm thickness
- 5mm rounded corners to make it a more reliable print
- 5mm rounded top left and right edges so the box will close easily
- A small handle in the middle so the whole thing can easily be lifted out of and back into a box - the photo shows one screwed on, but that was just because I wanted to test a screw attachment method. The model downloadable here has the handle just in the model already.
This sort of thing should be easily paramerisable, but I've never done this and have no need to do so for myself. If you'd like a model of one of these but with tweaked dimensions (longer/wider, taller, wider slots, different slot spacing etc) let me know and I'll whip one up.
Short post about this on Mastodon: https://digipres.club/@timixretroplays/114658829068817429