1 / 1
Scuba Tank DIN Valve Dust Plug — zdjęcie 1

Scuba Tank DIN Valve Dust Plug

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scuba Tank DIN Valve Dust Plug

Ocena
0 / 5
Polubienia
7
Pobrania
126
Wydruki
0
Wyświetlenia
317
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a dust plug for normal G5/8 DIN Valve threads on SCUBA tanks. Nothing special.

I realize there's plenty of models already out there for exactly this, but i wanted one with a short thread and a really nice feel to it without sharp edges (that's also my own).

These are not gas- or watertight on purpose so they don't get stuck or explode when you slightly open the valve by accident. That also means that they are not suitable to prevent water entry into a double valve when used with a single regulator. Please use proper brass/steel ones with O-rings for that if you have to.

 

Printing instructions

  • Material and settings don't really matter much for this one
  • Use 0.2mm or less layer height
  • Avoid the “Inner/Outer/Inner” wall printing order
  • I recommend using PETG or ASA

Tagi