1 / 1
Scuba Tank DIN Valve Dust Plug — image 1

Scuba Tank DIN Valve Dust Plug

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Scuba Tank DIN Valve Dust Plug

Rating
0 / 5
Likes
7
Downloads
126
Makes
0
Views
317
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Just a dust plug for normal G5/8 DIN Valve threads on SCUBA tanks. Nothing special.

I realize there's plenty of models already out there for exactly this, but i wanted one with a short thread and a really nice feel to it without sharp edges (that's also my own).

These are not gas- or watertight on purpose so they don't get stuck or explode when you slightly open the valve by accident. That also means that they are not suitable to prevent water entry into a double valve when used with a single regulator. Please use proper brass/steel ones with O-rings for that if you have to.

 

Printing instructions

  • Material and settings don't really matter much for this one
  • Use 0.2mm or less layer height
  • Avoid the “Inner/Outer/Inner” wall printing order
  • I recommend using PETG or ASA

Tags