Electrical outlet box for Decora Strap Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flush mount electrical box with a through hole on the back to mount a Decora electrical outlet.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please give this model a like so I can make more of them!
Not exactly a remix, but it was Rob Latur's electrical box is certainly the inspiration.
You can use this to flush mount a decora outlet or switch. It has strap mount holes in case they poke through a bit. You can also use them to screw directly into the plastic.
It worked out perfectly, and made a super tight seal on an outside install.
Use at your own risk and waterproof since 3D printed parts are porous. A STEP file has been included so it can be easily modified.
I used Mastercam so no 3df file is available, but Fusion 360 is very good at modifying STEP files. Try the Move and Press/Pull commands under the modify section.