120mm Fan Exhaust Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a nice fan exhaust duct to direct some of the airflow in my budget PC case (Cooler Master Q300L). I found…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a nice fan exhaust duct to direct some of the airflow in my budget PC case (Cooler Master Q300L). I found addennis' duct but the inner portion would obstruct a lot of the fan.
This isn't specifically a remix as the CAD is my own, but the obvious design elements were taken from his and so I want to give credit where due.
Print Settings
Printer Brand:
Voxelab
Printer:
Aquila V2
No
Supports:
No
.2
Infill:
15
Notes:
Easy print, but it is slow due to the thin walls. I printed with 3 perimeters, took about 9 hours.
Category: Computer