Waterproof Volvo Sport Key Tag case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement case, waterproof by adding the circuit board during print pause. Use at your own risk.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When the battery is empty of your Volvo Key Tag / Sport Key, you don't need to throw it away and order a new one from the dealer.
You can open it carefully, for example with a Dremel.
The original battery is a Panasonic CR-2032L/F1N, it is a CR2023 with tabs for soldering.
In Europe a CR-2032/GVFN is easier to get but you will have to bend and cut the legs a little to solder it.
This version of the case is roughly based on the one from @pretenda.
I don't use any screws but let the printer pause right before it starts printing the top.
This should make it waterproof (at your own risk).
In Orca Slicer I had to set "Bridge counterbore holes" to "Partially bridged" to make the bridging work correctly.