Waterproof Volvo Sport Key Tag case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement case, waterproof by adding the circuit board during print pause. Use at your own risk.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 72
- Makes
- 0
- Views
- 676
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When the battery is empty of your Volvo Key Tag / Sport Key, you don't need to throw it away and order a new one from the dealer.
You can open it carefully, for example with a Dremel.
The original battery is a Panasonic CR-2032L/F1N, it is a CR2023 with tabs for soldering.
In Europe a CR-2032/GVFN is easier to get but you will have to bend and cut the legs a little to solder it.
This version of the case is roughly based on the one from @pretenda.
I don't use any screws but let the printer pause right before it starts printing the top.
This should make it waterproof (at your own risk).
In Orca Slicer I had to set "Bridge counterbore holes" to "Partially bridged" to make the bridging work correctly.