Minimal stand for M4 Mac Mini for routing front cables to rear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The M4 Mini has two USB-C type ports on the front. This minimal stand routes the cables underneath to the rear neatly
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently upgraded to a M4 Mac Mini which has two USB-C type ports on the front. I didn't like having the cables running off to the side (see last photo) so I designed this short, minimalist, stand which allows the typical cables to run underneath. Looks better to me.
The two channels for feeding the cables to the rear hold them lightly in place. There is a small indentation on the top of the stand that matches the bottom of the Mac Mini. The indentation is minimal so it doesn't reduce airflow. The stand is 10mm high. It prints fine without supports. The opening at the left rear of the stand gives access to the power button if needed.